Kia Rio: Adjustment
| Battery Sensor Recalibration Procedure
|
If disconnecting the negative (-) battery cable from the battery during
repair work for the vehicle equipped with Alternator Managing System(AMS) function,
Battery sensor recalibration procedure should be performed after finishing
the repair work.
|
1. |
Turn the Iginition switch ON and OFF.
|
|
2. |
Park the vehicle about 4 hours under below states.
|
| A.
Park the vehicle about 4 hours under below states.
|
| B.
Closing the hood, trunk, and all doors.
|
|
3. |
After 4 hours later, check whether the current datas are displayed
normally or not using GDS.
|
| A.
Nominal capacity(AMS) = 45Ah [For Non-ISG type]
|
| B.
Nominal capacity(AMS) = 60Ah [For ISG type or Russia region]
|
| C.
State of Charge of Battery(AMS) = (0~100%)
|
| D.
State of Health of Battery(AMS) = (0~100%)
|
|
4. |
After cranking the engine 2 times or more, check "State of Function
of Battery(AMS) =(0~12V)". [For ISG system only]
|
1.
Check for DTCs.
•
If a DTC is ...
Inspection
Starting System