Kia Rio Manuals Rio Car Manuals
Technical Info

Kia Rio: Adjustment - Brake Pedal - Brake System - Kia Rio UB 2012-2020 Service ManualKia Rio: Adjustment

Brake Pedal Height and Free Play
1.
Disconnect the stop lamp switch connector (A).


2.
Adjust the brake pedal height (A) as illustration below.

Pedal height (A): 174.2 mm (6.86 in)
Full stroke (C): 108 mm (4.25 in)


3.
Adjust the stop lamp switch clearance (B).

Stop lamp clearance (B):
1.0 ~ 2.0 mm (0.04 ~ 0.08 in)

4.
Connect the stop lamp switch connector.
Stop lamp switch clearance adjustment
If the gap between stop lamp switch and bracket is not 1.0 ~ 2.0mm(0.04~ 0.08in), conform to below.
1.
Disconnect the stop lamp switch connector (A).


2.
Pull the locking plate (A) as indicated by the arrow.


3.
Turn stop lamp switch 45° counterclockwise and remove it.


4.
Fix the brake pedal arm and insert fully the stop lamp switch as hiding contact part.


5.
After inserting, turn the stop switch (A) 45° clockwise, and then assemble locking plate (B) by pushing.


6.
Confirm the gap between stop lamp switch and bracket.

Stop lamp clearance:
1.0 ~ 2.0 mm (0.04~ 0.08 in.)


7.
Connect the stop lamp switch connector.
Installation
1. Installation is the reverse of removal.    • ...
Front Disc Brake
...
See also:

Seat Belt Switch Removal
1. Remove the front seat. 2. After loosening the mounting bolt, then remove the front seat belt buckle (A). ...

Brake Booster Operating Test
For simple checking of the brake booster operation, carry out the following tests. 1. Run the engine for one or two minutes, and then stop it. If the pedal depresses ...

Description
Knocking is a phenomenon characterized by undesirable vibration and noise and can cause engine damage. Knock Sensor (KS) is installed on the cylinder block and senses engine knocking. Whe ...

Copyright © www.kiamanual.com 2020-2024 | Privacy Policy | Kia Car Parts