Rio Car Manuals
Technical Info

Kia Rio: Installation

1.

Installation is the reverse of removal.

•	Before installing the pin, apply the grease to the clevis pin.

•	Use a new snap pin whenever installing.

2.	Check the brake pedal operation.

Inspection

1. Check the bushing for wear. 2. Check the brake pedal for bending or twisting. 3. Check the brake pedal retur ...

Adjustment

Brake Pedal Height and Free Play 1. Disconnect the stop lamp switch connector (A). 2. Adjust the brake pedal height (A) as illustrat ...

See also:

Rain Sensor Removal
The rain sensor may not operate properly if contaminated. Protect the rain sensor surface by not removing the cover unti ...

Components Location
1. Engine Control Module (ECM) 2. Manifold Absolute Pressure Sensor (MAPS) 3. Intake Air Temperature Sensor (IATS) 4. Engine Coolant Temperature Sensor (ECTS) 5. Throttle Po ...

Components
1. Cylinder block 2. Ladder frame 3. Crankshaft 4. Crankshaft upper bearing 5. Crankshaft lower bearing 6. Thrust bearing 7. Main bearing cap 8. Adapter plate ...

Copyright © www.kiamanual.com 2020-2024 | Privacy Policy | Kia Car Parts