Kia Rio: Inspection

1.	Check the bushing for wear.

2.	Check the brake pedal for bending or twisting.

3.	Check the brake pedal return spring for damage.

Check the stop lamp switch.

(1)	Connect a circuit tester to the connector of stop lamp switch, and check whether or not there is continuity when the plunger of the stop lamp switch is pushed in and when it is released.

(2)	The stop lamp switch is in good condition if there is no continuity when plunger (A) is pushed.

1. Turn ignition switch OFF. 2. Remove the crash pad lower panel. (Refer to the Body group - "Crash pad") ...

1. Installation is the reverse of removal. • ...