Kia Rio Manuals Rio Car Manuals
Technical Info

Kia Rio: Removal - Brake Pedal - Brake System - Kia Rio UB 2012-2020 Service ManualKia Rio: Removal

1.
Turn ignition switch OFF.
2.
Remove the crash pad lower panel.
(Refer to the Body group - "Crash pad")
3.
Remove the shower duct (A).


4.
Disconnect the stop lamp switch connector (A).


5.
Remove the shift lock cable (B) after removing the snap pin and the clip.
6.
Remove the BCM.
(Refer to the Body Electrical group - "BCM")
7.
Remove the mounting bracket bolts (A).

Tightening torque:
9.8 ~ 14.7 N.m (1.0 ~ 1.5 kgf.m, 7.2 ~ 10.8 lb-ft)


8.
Remove the snap pin (A) and clevis pin (B).


9.
Remove the brake pedal member assembly mounting nuts (A) and then remove the brake pedal assembly.

Tightening torque:
16.7 ~ 25.5 N.m (1.7 ~ 2.6 kgf.m, 12.3 ~ 18.8 lb-ft)


Components
1. Brake pedal member assembly 2. Stop lamp switch 3. Pedal bushing 4. Return spring 5. Brake pedal 6. Brake pedal pad ...
Inspection
1. Check the bushing for wear. 2. Check the brake pedal for bending or twisting. 3. Check the brake pedal retur ...
See also:

Removal
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the manifold absolute pressure sensor connecto ...

Rear Washer Motor Inspection
1. With the washer motor connected to the reservoir tank, fill the reservoir tank with water. 2. Remove the front bumper cover. (Refer to t ...

Specifications
Item Specifications Transmission type A6GF1 Engine model Gasoline 1.6 GDI Torque converter type 3-element, 1-stage, 2-phas ...

Copyright © www.kiamanual.com 2020-2024 | Privacy Policy | Kia Car Parts