Kia Rio: Ambient Temperature Sensor Replacement
1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the engine room RH side under cover.
(Refer to EM group - “Engine and Transaxle Assembly”)
|
3. |
Disconnect the ambient temperature sensor connector (A).
|
4. |
Remove the ambient temperature sensor (A).
|
5. |
Install in the reverse order of removal.
|
1.
Turn the ignition switch OFF.
2.
Disconnect ambient temperature sensor.
3.
Check the resistance of ambient t ...
The Auto Defogging Sensor is installed on the front windshild glass. The
Auto Defogging Sensor senses moisture on the windshild. The air conditioner
control module receives the signal from th ...
See also:
Rear Shock Absorber Inspection
1.
Check the components for damage or deformation.
2.
Compress and extend the piston and check that there is no abnormal
resistance or unus ...
Components
...
Inspection
[System Inspection]
1.
Disconnect the vapor hose from the intake manifold and connect
a vacuum pump to the nipple on the intake manifold.
· At Cold Engine [Engi ...