Kia Rio: Auto Defogging Sensor (FATC only) Description

The Auto Defogging Sensor is installed on the front windshild glass. The Auto Defogging Sensor senses moisture on the windshild. The air conditioner control module receives the signal from the sensor and eliminates fog by controlling the intake actuator, A/C, auto defogging actuator, blower motor rpm, and mode actuator.

Ambient Temperature Sensor Replacement

1. Disconnect the negative (-) battery terminal. 2. Remove the engine room RH side under cover. (Refer to EM group - “Engine and Transax ...

Auto Defogging Sensor (FATC only) Inspection

1. Press the MODE switch more then 4 times within 2 seconds while pressing the OFF switch. Display Fail description 00 ...

See also:

Installation
1. Replace a clutch cover and disc as a set.    • ...

Hands free switch Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the driver airbag module. (Refer to the RT group - "DAB and Clock spring ...

Starter: Specification
Starter [Non-ISG type] Item Specification Rated voltage 12 V, 0.9 kW The number of pinion teeth 10 Performance [No-load, 1 ...