Kia Rio Manuals Rio Car Manuals
Technical Info

Kia Rio: Blower Motor Replacement - Blower - Heating,Ventilation, Air Conditioning - Kia Rio UB 2012-2020 Service ManualKia Rio: Blower Motor Replacement

1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad and heater & blower unit assembly.
(Refer to HA group – “Heater Unit”)
3.
Disconnect the blower motor connector (A).


4.
Remove the blower motor (A) after loosening the screws.


5.
Install in the reverse order of removal.
Blower Motor Inspection
1. Connect the battery voltage and check the blower motor rotation. 2. If the blower motor does not operate well, substitute with a know ...
Blower Resistor (MANUAL) Inspection
1. Measure the resistance between the terminals. 2. The measured resistance is not within specification, the blower resistor must be replac ...
See also:

Component Location
1. Headlamp leveling device 2. Headlamp leveling actuator ...

Fuel Pressure Test (Low pressure system)
1. Release the residual pressure in fuel line (Refer to the Fuel Delivery System - Repair Procedures - "Release Residual Pressure in Fuel Line"). ...

Ignition Coil: Description
An ignition coil is an induction coil in an engine's ignition system which transforms the battery's low voltage to the high voltage needed to create an electric spark in the spark plu ...

Copyright © www.kiamanual.com 2020-2024 | Privacy Policy | Kia Car Parts