Kia Rio Manuals Rio Car Manuals
Technical Info

Kia Rio: Blower Resistor (MANUAL) Inspection - Blower - Heating,Ventilation, Air Conditioning - Kia Rio UB 2012-2020 Service ManualKia Rio: Blower Resistor (MANUAL) Inspection

1.
Measure the resistance between the terminals.
2.
The measured resistance is not within specification, the blower resistor must be replaced. (After removing the resistor)


Blower Motor Replacement
1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad and heater & blower unit assembly. (Refer to HA group – “He ...
Blower Resistor (MANUAL) Replacement
1. Disconnect the negative (-) battery terminal. 2. Disconnect the connector (A) and then remove the blower resistor (B) after loosening th ...
See also:

Record your key number
The key code number is stamped on the key code tag attached to the key set. Should you lose your keys, this number will enable an authorized Kia dealer to duplicate the keys easily. After reco ...

Crash Pad Components
(1) 1 . Main crash pad assembly 2 . Crash pad side cover [LH] 3 . Crash pad side cover [RH] 4 . Fuse box cover 5 . Crash pad lower panel 6 . Knee bolster panel 7 . St ...

Service Standard
Item Specification Ignition Timing (°) BTDC 3 ± 10 Idle Speed (rpm) A/C OFF Neutral, N, P-range 630 ± 100 D-range ...

Copyright © www.kiamanual.com 2020-2024 | Privacy Policy | Kia Car Parts