Kia Rio Manuals Rio Car Manuals
Technical Info

Kia Rio: Electric Oil Pump: Description - ISG (Idle Stop & Go) System - Engine Control / Fuel System - Kia Rio UB 2012-2020 Service ManualKia Rio: Electric Oil Pump: Description

This transaxle has a standard Mechanical Oil Pump (MOP) linked to the input shaft to generates oil pressure when input shaft rotates.
But, this transaxle equipped with ISG system also has an Electric Oil Pump (EOP). Because the ISG system features Auto-Stop which starts and stops the engine as needed. The Auto-Stop feature prevents the Mechanical Oil Pump (MOP) from operating and building enough pressure for the transaxle to operate. When the vehicle comes to a stop with the engine off, Mechanical Oil Pump (MOP) cannot generate sufficient oil pressure during the initial startup or during low speed driving.
For these reasons, the Electric Oil Pump (EOP) takes on this role as an additional device that can generate the required oil pressure when the vehicle comes to a stop or during low speed driving. The Electric Oil Pump (EOP) supplies oil pressure to the Under Drive Brake (UD/B).

Electric Oil Pump: Circuit Diagram


Starter: Removal and Installation
1. Disconnect the battery negative terminal. 2. Remove the air duct and air cleaner assembly. (Refer to EM group) 3. ...
Electric Oil Pump: Circuit Diagram
...
See also:

Electrical System
1. Be sure to disconnect the battery cable from the negative (-) terminal of the battery. 2. Never pull on the wires when disconnecting con ...

Inspection
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the fuel pressure regulator valve connector. ...

Muffler: Components
1. Front muffler 2. Catalytic converter & Center muffler assembly 3. Main muffler 4. Gasket 5. Hanger ...

Copyright © www.kiamanual.com 2020-2024 | Privacy Policy | Kia Car Parts