Kia Rio: Evaporator Temperature Sensor Replacement| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Disconnect the evaporator temperature sensor connector (A).
|
| 3. |
Remove the evaporator temperature sensor (A) by pulling it out
after rotating 90° in a counterclockwise direction.
|
| 4. |
Install in the reverse order of removal.
|
Evaporator Temperature Sensor Inspection
In car sensor (FATC only) DescriptionComponent Location
1. Tailgate actuator & switch
2. Rear door switch
3. Body control module
4. Key warning switch
5. Front door switch
6. Front door lock actuator & switch
7. Rear do ...
Transaxle Control Module (TCM) Terminal Function
Connector [EGGG-AA]
Pin
Description
Pin
Description
22
Shift solenoid D (VFS-OD)
73
Inhibitor switch signal "S4"
...
Installation
1.
Remove the ignition key from the vehicle.
2.
Disconnect the battery negative cable and wait for at least thirty
seconds.
...
