Rio Car Manuals
Technical Info

Kia Rio: Filler-Neck Assembly Removal

1.	Open the fuel filler door, and then remove the filler-neck assembly mounting screws (A).

2.	Disconnect the fuel filler hose (A) and the vapor hose (B).

3.	Remove the filler-neck assembly from the vehicle after removing the bracket mounting bolt (A).

Fuel Filter Replacement

1. Remove the fuel pump (Refer to “Fuel Pump” in this group). 2. Disconnect the electric pump wiring connector (A) and the fuel sender conn ...

Filler-Neck Assembly Installation

1. Installation is reverse of removal. Filler-neck assembly bracket installation nut : 7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 ...

See also:

Removal
1. Turn ignition switch OFF, and disconnect the negative (-) battery cable. 2. Remove the battery and ECM. (Refer to Engine Electr ...

Record your key number
The key code number is stamped on the key code tag attached to the key set. Should you lose your keys, this number will enable an authorized Kia dealer to duplicate the keys easily. After reco ...

Inside rearview mirror
Adjust the rearview mirror so that the center view through the rear window is seen. Make this adjustment before you start driving. Do not place objects in the rear seat which would interfere with y ...

Copyright © www.kiamanual.com 2020-2024 | Privacy Policy | Kia Car Parts