Kia Rio Manuals Rio Car Manuals
Technical Info

Kia Rio: Front Bumper Replacement - Bumper - Body (Interior and Exterior) - Kia Rio UB 2012-2020 Service ManualKia Rio: Front Bumper Replacement


     
Put on gloves to protect your hands.
Use a plastic panel removal tool to remove interior trip pieces to without marring the surface.
Take care not bend or scratch the cover and other parts.
1.
After loosening the mounting clips, then remove the radiator grille upper cover (A).


2.
Loosen the front bumper upper (A) mounting clips.


3.
After loosening the front bumper side’s mounting screw, then disconnect the side’s.


4.
Remove the front bumper lower mounting clips.


5.
Disconnect the fog lamp connector (A).


6.
Remove the front bumper cover (A).


7.
Installation is the reverse of removal.

     
Make sure the connector is plugged in properly.
Replace any damage clips.
Front Bumper Components
1 . Radiator grille upper cover 2 . Front bumper cover 3 . Front bumper side bracket [LH] 4 . Front bumper side bracket [RH] ...
Rear Bumper Components
[5 Door] 1. Rear bumper cover 2. Rear bumper side bracket [RH] 3. Rear bumper side bracket [LH] 4. Rear bumper side under cover [4 Door] ...
See also:

Description
Canister Close Valve (CCV) is normally open and is installed on the canister ventilation line. It seals evaporative emission control system by shutting the canister from the atmosphere during ...

Specification
Item Specification Model Radio / MP3 / CD (PA30A) Radio / MP3 / VCD (BA900/ UVO) Power supply DC 14.4V Load Impedance 4 ...

Compressor Inspection
1. Check the plated parts of the disc & hub assembly (A) for color changes, peeling or other damage. If there is damage, replace the clutch set. ...

Copyright © www.kiamanual.com 2020-2024 | Privacy Policy | Kia Car Parts