Kia Rio: Front Hub / Knuckle Disassembly
|
1. |
Remove the snap ring (A).
|
|
2. |
Remove the hub assembly from the knuckle assembly.
|
|
(1) |
Install the front knuckle assembly (A) on press.
|
|
(2) |
Lay a suitable adapter (B) upon the hub assembly shaft.
|
|
(3) |
Remove the hub assembly (C) from the knuckle assembly
(A) by using press.
|
|
3. |
Remove the hub bearing inner race from the hub assembly.
|
|
(1) |
Install a suitable tool (A) for removing the hub bearing
inner race on the hub assembly.
|
|
(2) |
Lay the hub assembly and tool (A) upon a suitable adapter
(B).
|
|
(3) |
Lay a suitable adapter (C) upon the hub assembly shaft.
|
|
(4) |
Remove the hub bearing inner race (D) from the hub assembly
by using press.
|
|
4. |
Remove the dust cover (A).
|
|
5. |
Remove the hub bearing outer race from the knuckle assembly.
|
|
(1) |
Lay the hub assembly (A) upon a suitable adapter (B).
|
|
(2) |
Lay a suitable adapter (C) upon the hub bearing outer
race.
|
|
(3) |
Remove the hub bearing outer race from the knuckle assembly
by using press.
|
|
6. |
Replace hub bearing with a new one.
|
1.
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
2.
Remove the front wheel and tire (A) fro ...
1.
Install the hub bearing to the knuckle assembly.
(1)
Lay the knuckle assembly (A) on press.
(2)
...
See also:
Passenger Airbag (PAB) Module Description
The passenger airbag (PAB) is installed inside the crash pad and protects
the front passenger in the event of a frontal crash. The SRSCM determines if
and when to deploy the PAB.
...
Removal
1.
Remove the rear wheel & tire.
Tightening torque:
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
...
Rear combination lamp Installation
Rear combination lamp (Inside)
[4 Door]
1.
Install the rear combination lamp assembly.
2.
Connect the rear combination connecto ...
Front Hub / Knuckle Replacement
Front Hub / Knuckle Reassembly