Kia Rio Manuals Rio Car Manuals
Technical Info

Kia Rio: Rear combination lamp Installation - Lighting System - Body Electrical System - Kia Rio UB 2012-2020 Service ManualKia Rio: Rear combination lamp Installation

Rear combination lamp (Inside)
[4 Door]
1.
Install the rear combination lamp assembly.
2.
Connect the rear combination connector.
3.
Install the trunk trim.
4.
Connect the negative (-) battery terminal.
[5 Door]
1.
Install the rear combination lamp assembly.
2.
Connect the rear combination connector.
3.
Connect the negative (-) battery terminal.
Rear combination lamp (Outside)
1.
Install the rear combination lamp assembly.
2.
Connect the rear combination lamp connector.
3.
Connect the negative (-) battery terminal.
Rear combination lamp Removal
Rear combination lamp (Inside) [4 Door] 1. Disconnect the negative (-) battery terminal. 2. Remove the trunk trim. (Ref ...
Troubleshooting
1. The lamp switch inputs can be checked using the GDS. 2. To check the input value of lamp switch, select option "Body Control Module ...
See also:

Description
Rail Pressure Sensor (RPS) is installed on the delivery pipe and measures the instantaneous fuel pressure in the delivery pipe. The sensing element (Semiconductor element) built in the sensor ...

Components
1. Parking brake lever 2. Adjuster cable 3. Equalizer assembly 4. Parking brake cable ...

Specification
Item Specification Coil Resistance (Ω) 774 ~ 946 [20°C (68°F)] ...

Copyright © www.kiamanual.com 2020-2024 | Privacy Policy | Kia Car Parts