Kia Rio: Front Impact Sensor (FIS) Description

The front impact sensor (FIS) is installed in the front side member. They are remote sensors that detect acceleration due to a collision at its mounting location. The primary purpose of the FIS is to provide an indication of a collision. The FIS sends acceleration data to the SRSCM.

SRS Control Module (SRSCM) Variant coding

After replacing the SRSCM with a new unit, the “Variant Coding” procedure must be performed.    1. ...

Front Impact Sensor (FIS) Components

...

See also:

Electrical System
1. Be sure to disconnect the battery cable from the negative (-) terminal of the battery. 2. Never pull on the wires when disconnecting con ...

Power Mosfet (FATC) Replacement
1. Disconnect the negative (-) battery terminal. 2. Disconnect the connector (A) and then remove the power mosfet (B) after loosening the m ...

Filler-Neck Assembly Removal
1. Open the fuel filler door, and then remove the filler-neck assembly mounting screws (A). 2. Disconnect the fuel filler hose (A) ...