Kia Rio: Fuel Tank Removal
1. |
Release the residual pressure in fuel line (Refer to the Fuel
Delivery System - Repair Procedures - "Release Residual Pressure in
Fuel Line").
|
2. |
Remove the rear seat [LH] (Refer to “Seat” in BD group).
|
3. |
Remove the fuel pump service cover (A).
|
4. |
Disconnect the fuel pump connector (A).
|
5. |
Disconnect the fuel feed tube quick connector (B).
|
6. |
Disconnect the fuel tank pressure sensor connector (C).
|
7. |
Disconnect the vapor tube (D).
|
8. |
Lift the vehicle and support the fuel tank with a jack.
|
9. |
Remove the center muffler assembly (Refer to “Intake And Exhaust
System” in EM group).
|
10. |
Disconnect the fuel filler hose (A) and the vapor hose (B).
|
11. |
Remove the parking brake line installation bolt (A).
|
12. |
Remove the fuel tank from the vehicle after removing the fuel
tank band (A).
|
Whenever the high pressure fuel pump, fuel pipe, delivery pipe,
or injector is removed immediately after shutting off th ...
1.
Installation is reverse of removal.
Fuel tank band installation
nut:
39.2 ~ 54.0 N.m (4.0 ~ 5.5 kgf.m, 28.9 ~ 39.8 lb-ft)
...
See also:
Removal
1.
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
2.
Remove the resonator and the air intake hose (Refer to “I ...
Installation
•
Install the component with the specified torques.
•
...
Climate Control Air Filtar Replacement
1.
Open the glove box.
2.
Remove the filter cover (A) by pressing the knob.
3.
Replace the air filter ( ...