Kia Rio: Hood switch Description

The hood switch is included as the influencing factors in the calculation of the ISG function. If the hood is open, the engine must not be started or stopped by the ISG function for safety reasons.

Seat Belt Switch Installation

1. Install is reverse of removal. ...

Hood switch Inspection

1. Disconnect the hood switch connector (A). 2. Check for continuity between terminals ...

See also:

Receiver-Drier Replacement
1. Remove the condenser. 2. Remove the cap (B) on the bottom of the condenser with L wrench (A). Tightening torq ...

Description
Manifold Absolute Pressure Sensor (MAPS) is a speed-density type sensor and is installed on the surge tank. It senses absolute pressure of the surge tank and transfers the analog signal propo ...

Door Switch Inspection
1. Remove the door switch and check for continuity between the terminals. ...