Kia Rio: Inspection

Throttle Position Sensor (TPS)

1.	Connect the GDS on the Data Link Connector (DLC).

Start the engine and measure the output voltage of TPS 1 and 2 at C.T. and W.O.T.

Specification: Refer to “Specification”

ETC Motor

1.	Turn the ignition switch OFF.

2.	Disconnect the ETC module connector.

3.	Measure resistance between the ETC module terminals 1 and 2.

Check that the resistance is within the specification.

Specification: Refer to “Specification”

(M/T) (A/T) ...

1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Remove the resonator and the air intake hose (Refer to “I ...