Kia Rio Manuals Rio Car Manuals
Technical Info

Kia Rio: Installation 
 - CVVT Oil Control Valve (OCV) - Engine Control System - Engine Control / Fuel System - Kia Rio UB 2012-2020 Service ManualKia Rio: Installation


     
Install the component with the specified torques.
Note that internal damage may occur when the component is dropped. If the component has been dropped, inspect before installing.

     
Apply engine oil to the valve O-ring.
1.
Installation is reverse of removal.

CVVT oil control valve installation bolt:
9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)

Removal
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the CVVT oil control valve connector (A). ...
Variable Intake Solenoid (VIS) Valve
...
See also:

Input Speed Sensor Signal Waveform
Fig 1) Input/Output speed sensor at low speed Fig 2) Input/Output speed sensor at high speed ...

Components
1. Master cylinder 2. Ignition lock switch 3. Clutch switch 4. Pedal pad ...

Head Lamp Leveling Switch Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel. (Refer to the BD group - "Crash pad") ...

Copyright © www.kiamanual.com 2020-2024 | Privacy Policy | Kia Car Parts