Rio Car Manuals
Technical Info

Kia Rio: Removal

1.	Turn the ignition switch OFF and disconnect the battery negative (-) cable.

2.	Disconnect the CVVT oil control valve connector (A).

3.	Remove the installation bolt (B), and then remove the valve from the engine. [Bank 1 / Intake] [Bank 1 / Exhaust]

Inspection

1. Turn the ignition switch OFF. 2. Disconnect the OCV connector. 3. Measure resistance between the OCV termina ...

Installation

• Install the component with the specified torques. • ...

See also:

LCD display warning (if equipped)
For vehicle’s equipped with smart key system Key is not in vehicle If the smart key is not in the vehicle and if any door is opened or closed with the engine start/stop button in the ACC, ON, or ...

Line Pressure Control Solenoid Valve Description
line pressure control solenoid valve is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the line pressure. ...

Sunroof Motor Replacement
1. Disconnect the negative (-) battery terminal. 2. Remove the roof trim. (Refer to the BD group - " Roof trim") ...

Copyright © www.kiamanual.com 2020-2024 | Privacy Policy | Kia Car Parts