Kia Rio: Line Pressure Control Solenoid Valve Description

line pressure control solenoid valve is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the line pressure.

26 Brake Control Solenoid Valve(26/B_VFS) Removal

   Replacing an on/off solenoid valve (SS-A, SS-B) does not require additional hydraulic pressure adjustment; however, the ...

Line Pressure Control Solenoid Valve Specifications

Direct control VFS[LINE Pressure] ▷ Control type : Normal low type Control Pressure kpa (kgf/cm², psi) 500.14 ~ 9.81 (5.1 ~ 0.1,72.54 ~ 1.42) Current ...

See also:

Front Driveshaft Inspection
1. Check the driveshaft boots for damage and deterioration. 2. Check the driveshaft spline for wear or damage. 3. ...

Installation
1. Combustion seal 2. Rubber washer 3. Support disc 4. O-ring ...

Multimedia Jack Troubleshooting
Symptom Suspected area Repairment Pressing power switch does not turn on system Radio receiver power source circuit R-1 LCD module R ...