Kia Rio Manuals Rio Car Manuals
Technical Info

Kia Rio: Instrument Cluster Removal - Indicators And Gauges - Body Electrical System - Kia Rio UB 2012-2020 Service ManualKia Rio: Instrument Cluster Removal

1.
Disconnect the negative (-) battery terminal.
2.
Using a screwdriver or romover, remove the cluster fascia panel (A).
3.
Disconnect the start/stop button connector (A) and hazard switch connector (B).
4.
Using a screwdriver or remover, remove the cluster fascia panel (A).
5.
Remove the cluster fascia (A) from the crash pad after removing 2 screws.
6.
Disconnect the cluster fascia connecters (A) and then remove the cluster.
Instrument Cluster Inspection
Speedometer 1. Adjust the pressure of the tires to the specified level. 2. Drive the vehicle onto a speedometer tester. Use wheel chocks ...
Instrument Cluster Installation
1. Connect the cluster connector. 2. Install the cluster assembly. 3. Install the center fascia panel. ...
See also:

Passenger Airbag (PAB) Module Description
The passenger airbag (PAB) is installed inside the crash pad and protects the front passenger in the event of a frontal crash. The SRSCM determines if and when to deploy the PAB. ...

Removal
1. Turn ignition switch OFF. 2. Remove the crash pad lower panel. (Refer to the Body group - "Crash pad") ...

SS-A Solenoid Valve(ON/OFF) Installation
1. Installation is the reverse of removal.    • When installing, ...

Copyright © www.kiamanual.com 2020-2024 | Privacy Policy | Kia Car Parts