Kia Rio: Intake Actuator Description

The intake actuator is located at the blower unit. It regulates the intake door by signal from control unit. Pressing the intake selection switch will shift between recirculation and fresh air modes.

Climate Control Air Filtar Replacement

1. Open the glove box. 2. Remove the filter cover (A) by pressing the knob. 3. Replace the air filter ( ...

Intake Actuator Inspection

1. Turn the ignition switch OFF. 2. Disconnect the intake actuator connector. 3. Verify that the intake actuato ...

See also:

Weight Classification System (WCS) Installation
   WCS(Weight Classification System) is utilizing a robust weight measuring technology. Thus, if any of the following condi ...

Output Speed Sensor Installation
1. Installation is the reverse of removal.    After replacement or reinstallation procedure of ...

Manual transaxle
Manual transaxle operation The manual transaxle has 6 forward gears. This shift pattern is imprinted on the shift knob. The transaxle is fully synchronized in all forward gears so shifting to ei ...