Kia Rio Manuals Rio Car Manuals
Technical Info

Kia Rio: Output Speed Sensor Installation - Automatic Transaxle Control System - Automatic Transaxle System - Kia Rio UB 2012-2020 Service ManualKia Rio: Output Speed Sensor Installation

1.
Installation is the reverse of removal.

     
After replacement or reinstallation procedure of the valve body assembly, must perform procedures below.
The gasket of the valve body gasket (A) use new one.


Adding automatic transaxle fluid.
(Refer to "Hydraulic system (Fluid)" in this group)
Output Speed Sensor Removal
1. Remove the battery and the battery tray. (Refer to "Charging system" in EE group.) 2. Remove the under cover (A). ...
Torque Converter Control Solenoid Valve (T/CON_VFS) Description
Torque converter control solenoid valve (T/CON_VFS) is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the torque converter. ...
See also:

Condenser Replacement
1. Recover the refrigerant with a recovery/recycling/charging station. 2. Disconnect the negative (-) battery terminal. 3. ...

Description
Back view camera will activate when the backup light is ON with the ignition switch ON and the shift lever in the R position. This system is a supplemental system that shows behind the vehic ...

Schematic Diagram
Canister The Canister is filled with charcoal and absorbs evaporated fuel vapor from the fuel tank. The gathered fuel vapor in canister is drawn into the intake manifold by the ECM/PC ...

Copyright © www.kiamanual.com 2020-2024 | Privacy Policy | Kia Car Parts