1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the crash pad.
(Refer to BD group - "Crash Pad")
|
3. |
Remove the side bracket (A).
|
4. |
Disconnect the connector (A) and then remove the intake actuator
(B) after loosening the mounting screws.
|
5. |
Install in the reverse order of removal.
|
Trunk Lid Adjustment
1.
After loosening the trunk lid hinge (A) mounting bolt, adjust
the trunk lid by moving it up or down, or right or left.
2.
Adjust the tru ...
Adjustment
Battery charging
In general, vehicle battery charging system has three forms.
1.
Constant current charge: The battery voltage gradually rises by
chargi ...
Driver Airbag (DAB) Module and Clock Spring Installation
1.
Set the front tires straight-ahead before assembling the steering
wheel.
...