Rio Car Manuals
Technical Info

Kia Rio: Rear Wiper Motor Removal

1.	Detach the wiper cap (A) and remove a nut (B).

2.	Remove the rear wiper arm & blade (A).

3.	Remove the rubber packing (A).

4.	Open the tailgate then remove the tailgate trim. (Refer to the BD group - "Tail gate")

5.	Disconnect the rear wiper motor connector (A) then remove the rear wiper motor (B) after removing 3 bolts.

Component Location

1. Head cap 2. Nut 3. Rear wiper arm & Blade 4. Packing (rubber) 5. Rear wiper motor assembly 6. Bolt ...

Rear Wiper Motor Installation

1. Install the rubber packing. 2. Install the rear wiper motor assembly. Tightening torque : 6.86 ~ 9.81N ...

See also:

Engine compartment
1. Engine coolant reservoir 2. Engine oil filler cap 3. Brake/clutch fluid reservoir 4. Air cleaner 5. Fuse box 6. Positive battery terminal 7. Negative battery terminal 8. Windshield washer ...

Side Impact Sensor (SIS) Installation
Pressure Side Impact Sensor 1. Install the new pressure side impact sensor with the screws (B) then connect the pressure side impact sensor connector (A). ...

Audio Head Unit
1. (EJECT) Ejects the disc. 2. Changes to FM/AM/SIRIUS mode. Each time the key is pressed, the mode is changed in order of FM1 ➟ FM2 ➟ AM ➟ SAT1 ➟ SAT2 ...

Copyright © www.kiamanual.com 2020-2024 | Privacy Policy | Kia Car Parts