Rio Car Manuals
Technical Info

Kia Rio: Removal

1.	Disconnect the battery negative terminal.

2.	Disconnect the air compressor connector (A) and the alternator connector (B), and remove the cable from alternator "B" terminal (C).

3.	Loosen the mounting bolts, and then turn the adjusting bolt (A) clockwise to loosen tension.

4.	Remove the drive belt (A).

5.	Remove the alternator (A) after remove the mounting bolts.

Circuit Diagram

...

Installation

1. Install in the reverse order of removal. 2. Adjust the alternator belt tension after installation. (Refer to Engine charging Sy ...

See also:

Components
1. Cylinder block 2. Ladder frame 3. Crankshaft 4. Crankshaft upper bearing 5. Crankshaft lower bearing 6. Thrust bearing 7. Main bearing cap 8. Adapter plate ...

Special Service Tools
Item Illustration Application Fuel Pressure Gauge (09353-24100) Measuring the fuel line pressure Fuel Pressure Gauge Adapte ...

26 Brake Control Solenoid Valve(26/B_VFS) Removal
Replacing an on/off solenoid valve (SS-A, SS-B) does not require additional hydraulic pressure adjustment; however, the ...

Copyright © www.kiamanual.com 2020-2024 | Privacy Policy | Kia Car Parts