Kia Rio: Installation

1.	Install in the reverse order of removal.

Adjust the alternator belt tension after installation.

(Refer to Engine charging System - "Drive belt tension measurement and adjustment")

Alternator installation bolt:

[12mm (0.47in) bolt]

19.6 ~ 26.5 Nm (2.0 ~ 2.7 kgf.m, 14.5 ~ 19.5 Ib-ft)

[14mm (0.55in) bolt]

29.4 ~ 41.2 Nm (3.0 ~ 4.2 kgf.m, 21.7 ~ 30.4 Ib-ft)

1. Disconnect the battery negative terminal. 2. Disconnect the air compressor connector (A) and the alternator connector (B), and remove th ...

1. Remove the rear cover (A) after removing nuts. 2. Remove the mounting bolts (A) and the brush holder assembly (B). ...