Kia Rio: Shift Lever Adjustment

1.	In neutral position, disjoin select cable (A) from shift lever assembly pin (B).

2.	Disconnect select adjuster (A) to an arrow.

3.	Shift to the 3th gear position.

4.	Adjustment adjuster (B) on select cable (A) as rolling from side to side.

5.	Insert on free load and press the adjuster.

After shifting 2nd gear, cheking the left select gap about 1mm(if not, loop no, 1~5)

If there are still gate blocking in spite of re-adjustment, shift lever assembly stopper stoke must be cheked.

7.	In neutral position, jion by clip (A).

1. Check the select cable for proper operation and for damage. 2. Check the shift cable for proper operation and for damage. ...

Back up lamp switch is pushed by the reverse lug sliding when select arm, and switches the back up lamp. ...