Kia Rio: SRS Control Module (SRSCM) Removal

1.	Remove the ignition key from the vehicle.

2.	Disconnect the battery negative cable and wait for at least three minutes before beginning work.

3.	Remove the floor console. (Refer to the Body group - "Console")

4.	Remove the rear heating joint duct (A).

5.	Pull up the lock, of the SRSCM connector, the disconnect the connector (A).

6.	Remove the SRSCM mounting nuts (3EA) from the SRSCM, then remove the SRSCM.

...

1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least three minutes before beginning ...