Kia Rio: Starter: Description

The starting system includes the battery, starter, solenoid switch, ignition switch, inhibitor switch (A/T), clutch pedal switch (M/T), ignition lock switch, connection wires and the battery cable.

When the ignition key is turned to the start position, current flows and energizes the starter motor's solenoid coil.

The solenoid plunger and clutch shift lever are activated, and the clutch pinion engages the ring gear.The contacts close and the starter motor cranks.

In order to prevent damage caused by excessive rotation of the starter armature when the engine starts, the clutch pinion gear overruns.

In conjunction with the ISG function, the starter motor must do a great deal more work. Therefore, the starter motor is configured for a significantly higher number of start cycles. The components of the starter motor have been adapted to the higher requirements.

Troubleshooting

   • The battery must be in good condition and fully charged for this troubleshooting. ...

Starter: Specification

Starter [Non-ISG type] Item Specification Rated voltage 12 V, 0.9 kW The number of pinion teeth 10 Performance [No-load, 1 ...

See also:

Water pump: Troubleshooting
Water Pump Symptoms Possible Causes Remedy Coolant leakage • From the bleed hole of the water pump ...

Passenger Airbag (PAB) Module Components
...

Turn Signal Lamp (Door mirror) Removal
Door Mirror Turn Signal Lamp 1. Using a screwdriver or remover, remove the mirror (A) from th mirror holder. Becareful not to damage to the clip. ...