Kia Rio Manuals Rio Car Manuals
Technical Info

Kia Rio: Temperature Control Actuator Replacement - Heater - Heating,Ventilation, Air Conditioning - Kia Rio UB 2012-2020 Service ManualKia Rio: Temperature Control Actuator Replacement

1.
Disconnect the negative (-) battery terminal.
2.
Remove the driver side shower duct (A) after loosening the screw.


3.
Disconnect the connector (A) and then remove the temperature control actuator (B) after loosening the mounting screws.


4.
Install in the reverse order of removal.
Temperature Control Actuator Inspection
1. Turn the ignition switch OFF. 2. Disconnect the temperature control actuator connector. 3. Verify that the t ...
Mode Control Actuator Description
The mode control actuator is located at the heater unit. It adjusts position of mode door by operating mode control actuator based on signal of A/C control unit. Pressing mode select switch ...
See also:

Sunroof Replacement
Glass Replacement    • Put on glove to protect your hands. ...

Disaseembly
1. Loosen the screw(6ea) and remove the lower cover (A) from the steering wheel body. 2. Disconnect the heated steering wheel unit ...

Line Pressure Control Solenoid Valve Specifications
Direct control VFS[LINE Pressure] ▷ Control type : Normal low type Control Pressure kpa (kgf/cm², psi) 500.14 ~ 9.81 (5.1 ~ 0.1,72.54 ~ 1.42) Current ...

Copyright © www.kiamanual.com 2020-2024 | Privacy Policy | Kia Car Parts