Kia Rio: Water pump: Inspection
1. |
Check each part for cracks, damage or wear, and replace the coolant
pump assembly if necessary.
|
2. |
Check the bearing for damage, abnormal noise and sluggish rotation,
and replace the coolant pump assembly if necessary.
|
3. |
Check for coolant leakage. If coolant leaks from hole, the seal
is defective. Replace the coolant pump assembly and gasket.
A small amount of “weeping” from the bleed hole is normal.
|
Water Pump
1.
Drain engine coolant.
System is under high pre ...
Water Pump
Symptoms
Possible Causes
Remedy
Coolant leakage
•
From the bleed hole of the water pump
...
See also:
Ambient Temperature Sensor Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect ambient temperature sensor.
3.
Check the resistance of ambient t ...
Circuit Diagram
(M/T)
(A/T)
...
Interior light
Do not use the interior lights for extended periods when the engine is not running.
It may cause battery discharge.
WARNING - Interior light
Do not use the interior lights when driving in the dark. ...