Kia Cee'd: Troubleshooting / Ambient Temperature Sensor Repair procedures

Kia Cee'd JD Service Manual / Heating,Ventilation, Air Conditioning / Troubleshooting / Ambient Temperature Sensor Repair procedures

Inspection

1.	Turn the ignition switch OFF.

2.	Disconnect the ambient temperature sensor.

Check the resistance of the ambient temperature sensor between terminal “+” and “-” whether it is changed by changing of the ambient temperature.

Specification

Ambient temperature [°C(°F)]	Resistance [kΩ]	Voltage [V]
-30(-22)	480.41	4.71
-20(-4)	271.21	4.50
-10(14)	158.18	4.20
0 (32)	95.10	3.80
10 (50)	58.80	3.31
20 (68)	37.32	2.77
30(86)	24.26	2.24
40(104)	16.13	1.75
50(122)	10.95	1.34

4.	If the measured resistance is not within specification, substitute with a known-good ambient temperature sensor and check for proper operation.

5.	If the problem is corrected, replace the ambient temperature sensor.

Replacement

1.	Disconnect the negative (-) battery terminal.

2.	Remove the front bumper cover. (Refer to Body - "Front Bumper Cover")

3.	Disconnect the ambient temperature sensor connector (A).

4.	Remove the ambient temperature sensor (B).

5.	Install in the reverse order of removal.

Ambient Temperature Sensor Description and operation

Description The ambient temperature sensor is located at the front of the condenser and detects ambient air temperature. It is a negative type thermistor; resistance will increas ...

Auto Defogging Sensor Description and operation

Description The auto defogging sensor is installed on the front window glass. The sensor judges and sends signal if moisture occurs to blow out wind for defogging. The air condit ...

Other information:

Kia Cee'd JD Service Manual: Front Wheel Guard Repair procedures
Replacement • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. ...

Kia Cee'd JD Service Manual: Manual Transaxle Components and components location
Components 1. Manual transaxle assembly 2. Manual transaxle support bracket 3. Clutch release bearing 4. Clutch release fork 5. Control cable bracket 6. Control shaft complete 7. Clutch tube bracket 8. Clutch release cylinder ...