Kia Cee'd: Troubleshooting / Ambient Temperature Sensor Description and operation

The ambient temperature sensor is located at the front of the condenser and detects ambient air temperature. It is a negative type thermistor; resistance will increase with lower temperature, and decrease with higher temperature.

The sensor output will be used for discharge temperature control, temperature regulation door control, blower motor level control, mix mode control and in-car humidity control.

Photo Sensor Repair procedures

Inspection 1. Turn the ignition switch ON. 2. Connect the GDS. 3. Emit intensive light toward the photo s ...

Ambient Temperature Sensor Repair procedures

Inspection 1. Turn the ignition switch OFF. 2. Disconnect the ambient temperature sensor. 3. Check the re ...

Other information:

Kia Cee'd JD Owners Manual: Tilting the sunroof
When the sunshade is closed If you push the sunroof control lever upward, the sunshade will slide all the way open then the sunroof glass will tilt. To stop the sunroof movement at any point, pull or push the sunroof control lever momentarily. When the sunshade is opened If you push th ...

Kia Cee'd JD Service Manual: Injector Troubleshooting
Signal Waveform The three waveforms below are taken from the #1 and #4 injectors. The top waveform is from the high side (feed side) of the #1 and #4 injectors, while the middle waveform is from the low side (ground side) of the #1 injector and the bottom waveform is from th ...