Kia Cee'd: Steering wheel / Heated Steering wheel Description and operation

"The heated steering wheel features an internal heating element that maintains the steering wheel temperature to a consistent level during cold seasons. A heater element has been integrated into the steering handle to maximize driver comfort during cold seasons. The steering wheel heating system will not be active with an ambient temperature above the system set point temperature. The steering wheel heater element is connected through a wire harness and regulated through an electronic control module.The control module responds to a temperature sensor’s (negative temperature coefficient - NTC thermistor) resistance change, which is in direct contact with the steering wheel heater element."

Heated control unit

Heated pad

Specifications

 

Repair procedures

Replacement 1. Disconnect the battery negative cable from the battery and then wait for at least 30 seconds. 2. Turn the steering w ...

Heated Steering wheel Schematic diagrams

System Circuit Diagram Terminal Function   Housing Pin Function Wire color Pad A ...

Other information:

Kia Cee'd JD Service Manual: SRS Control Module (SRSCM) Repair procedures
Removal 1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least three minutes before beginning work. 3. Remove the floor console. (Refer to Body ...

Kia Cee'd JD Owners Manual: Calendar / Clock / Outside ambient Temperature
The monitor will display the outside ambient temperature, date and time. To change the date, time or temperature unit(°C ↔ °F), press the SET(2) or Temp button for more than 1 seconds. Then you will enter the set-up mode and mode changes in the following order as you press the ...