Kia Cee'd: Troubleshooting / In car sensor (DATC only) Description and operation
Kia Cee'd JD Service Manual / Heating,Ventilation, Air Conditioning / Troubleshooting / In car sensor (DATC only) Description and operation
| Description |
The In-car air temperature sensor is built in the heater & A/C control unit.
The sensor contains a thermistor which measures the temperature of the inside.
The signal decided by the resistance value which changes in accordance with
perceived inside temperature, is delivered to the heater control unit and according
to this signal the control unit regulates the in-car temperature to the intended
value.
Evaporator Temperature Sensor Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the evaporator temperature sensor connector.
3.
...
Photo Sensor Description and operation
Description
The photo sensor is located at the center of the defrost nozzles.
The photo sensor contains a photovoltaic (sensitive to sunlight) diode. The
solar radiation recei ...
Other information:
Kia Cee'd JD Service Manual: Front Seat Cushion Cover Components and components location
Component Location
1. Front seat cushion cover
...
Kia Cee'd JD Service Manual: Blind Spot Detection Switch Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad lower panel.
(Refer to Body - "Crash Pad Lower Panel")
3.
Remove the lower crash pad switch assembly (A) ...