Kia Cee'd: Intake And Exhaust System / Intake Manifold Repair procedures
Kia Cee'd JD Service Manual / Engine Mechanical System / Intake And Exhaust System / Intake Manifold Repair procedures
Removal and Installation |
1. |
Remove the engine cover.
|
2. |
Disconnect the battery negative terminal.
|
3. |
Remove the air cleaner assembly.
(Refer to Intake And Exhaust System-"Air Cleaner")
|
4. |
Disconnect the injector extension connector (A), the VIS (Variable intake
system) connector (B) and the PCSV (Purge control solenoid valve) connector
(C).
|
5. |
Disconnect the ETC (Electronic throttle control) connector (A) and the
MAPS (Manifold absolute pressure sensor) connector (B).
(Refer to Fuel System - "ETC System")
|
6. |
Disconnect the knock sensor connector (A).
|
7. |
Disconnect the PCV (Positive crankcase ventilation) hose (A) and the
PCSV (Purge control solenoid valve) hose (B).
|
8. |
Disconnect the vacuum hose (A) and the throttle body coolant hoses (B).
|
9. |
Unfasten the filler neck assembly mounting bolts (A).
|
10. |
Remove the intake manifold (A) with the gasket.
|
11. |
Install in the reverse order of removal.
|
Intake Manifold Components and components location
Components 1. Intake manifold assembly 2. Intake manifold gasket 3. Electronic throttle body gasket 4. Electronic throttle body 5. Bracket ...Exhaust Manifold Components and components location
Components 1. Heat protector 2. Exhaust manifold 3. Gasket 4. Exhaust manifold stay ...Other information:
Kia Cee'd JD Service Manual: Description and operation
Description
Adaptive Front-lighting System (AFLS)
AFLS(Adaptive Front-lighting System)is a headlamp orientation control system
that takes into account both steering angle and vehicle speed to orient the
headlamps to an angle that provides better nighttime visibility.
...
Kia Cee'd JD Owners Manual: Aiming point
H1 : Height between the head lamp bulb center and ground (Low beam)
H2 : Height between the head lamp bulb center and ground (High beam)
H3 : Height between the fog lamp bulb center and ground
W1 : Distance between the two head lamp bulbs centers (Low beam)
W2 : Distance between the two head l ...