Kia Ceed Manuals Ceed Car Manuals
Technical Info

Kia Cee'd: Dual Clutch Transmission Control System / Shift Lever Repair procedures

Removal
1.
Remove the floor console assembly.
(Refer to Body - "Floor Console")
2.
Remove the air duct.
3.
Disconnect the control cable (A).

4.
Disconnect the connector (A).
5.
Disconnect the wire mounting clips (B).
6.
Remove the bolt and then the shift lever assembly (C).
Tightening torque:
8.8 ~ 13.7 N.m (0.9 ~ 1.4 kgf.m, 6.5 ~ 10.1 lb-ft)

Installation
1.
Install in the reverse order of removal.
  
Install the cable after placing the shift lever and the transmission manual control lever in the N position.
Shift Lever Components and components location
Components   1. Shift lever assembly  2. Shift cable assembly 3. Retainer 4. Bolt 5. Nut 6. Manual control lever ...
Shift Cable Components and components location
Components   1. Shift lever assembly  2. Shift cable assembly 3. Retainer 4. Bolt 5. Nut 6. Manual control lever 7. Knob ...
Other information:

Kia Cee'd JD Owners Manual: Trip computer
The trip computer is a microcomputercontrolled driver information system that displays information related to driving when the ignition switch is in the ON position. All stored driving information (except odometer, distance to empty and instant fuel economy) resets if the battery is ...

Kia Cee'd JD Service Manual: Troubleshooting
Troubleshooting   Symptom Suspect area Remedy Engine misfire with abnormal internal lower engine noises. Loose or improperly installed engine flywheel. Repair or replace the flywheel as required. ...

Copyright © www.kiamanual.com 2020-2024 | Privacy Policy | Kia Car Parts