Kia Cee'd: Driving your vehicle / Speed limit control system
You can set the speed limit when you do not want to drive over a specific speed. If you drive over the preset speed limit, the warning system operates (set speed limit will blink and chime will sound) until the vehicle speed returns within the speed limit.
✽ NOTICE
While speed limit control is in operation, the cruise control system cannot be activated.
- Speed limit control switch
- To set speed limit
- To turn off the speed limit control, do one of the following
To turn cruise control off, do one
of the following
Move the lever down ().
Move the lever up (). (If
you move
the lever up, the speed limit system will
turn on)
Turn the ignition off.
Both of these actions cancel cruise control
op ...
Speed limit control switch
O: Cancels set speed limit.
: Turns speed limit control
system on
or off.
RES+: Resumes or increases speed limit
control speed.
SET-: Sets or decreases speed limit control
speed. ...
Other information:
Kia Cee'd JD Service Manual: Roller Blind Motor Repair procedures
Inspection
1.
Disconnect the negative (-) battery terminal.
2.
Remove the roof trim assembly.
(Refer to Body - "Roof Trim Assembly")
3.
Disconnect the connector (A).
4 ...
Kia Cee'd JD Service Manual: Input Speed Sensor 2 Description and operation
Description
The input shaft speed sensor is important in that it detects the input shaft
RPM and sends this information to the Transmission Control Module (TCM).
It provides important input information for electric control.
The information is needed in all operations, i ...