Kia Rio: Lighting control / Auto light position
Kia Rio 2017-2020 YB Owners Manual / Features of your vehicle / Lighting / Lighting control / Auto light position
■ Type A
■ Type B
When the light switch is in the AUTO light position, the taillights and headlights will turn ON or OFF automatically depending on the amount of light outside the vehicle.
CAUTION
Never place anything over the sensor (1) located on the instrument panel.This will ensure better auto-light system control.
Do not clean the sensor using a window cleaner, the cleaner may leave a light film which could interfere with sensor operation.
If your vehicle has window tint or other types of metallic coating on the front windshield, the Auto light system may not work properly.
Headlight position ()
■ Type A
■ Type B
When the light switch is in the headlight position (4th position) the head, tail,
position, license and instrument panel lights will turn ON.
The ignition switch must be ...
High beam operation
■ Type A
■ Type B
To turn on the high beam headlights, push the lever away from you. Pull it back
for normal (low beam) position. The high beam indicator light will illuminate when
the h ...
Other information:
Kia Rio 2017-2020 YB Service Manual: Center Pillar Trim
Components and components location Component Location 1. Center pillar lower trim 2. Center pillar upper trim Repair procedures Replacement [Center pillar lower trim] ...
Kia Rio 2017-2020 YB Service Manual: Fuel Pump
Repair procedures Inspection [Fuel pump] 1. Turn ignition switch OFF and disconnect the negative (-)battery cable. 2. Remove the fuel pump assembly. 3. Check motor operation by fuel pump connector (A) connecting power(No. ...