Kia Rio: Features of your vehicle / Lighting
Battery saver function
- The purpose of this feature is to prevent the battery from being discharged. The system automatically turns off the parking lights when the driver removes the ignition key and opens the driver-side door.
- With this feature, the parking lights will turn off automatically if the driver parks on the side of the road at night.
If necessary, to keep the lights on when the ignition key is removed, perform the following:
1) Open the driver-side door.
2) Turn the parking lights OFF and ON again using the light switch on the steering
column.
- Headlight escort function, Headlight welcome function, Daytime running light
- Lighting control
- High beam operation
- Turn signals and lane change signals
- Front fog light
Rear view monitor system
Rear View Monitor function ■ Type A ■ Type B Rear View Monitor system will activate with the ignition switch on and the shift lever in the R (Reverse) position. Please note that during ...Headlight escort function, Headlight welcome function, Daytime running light
Headlight escort function (if equipped) The headlights (and/or taillights) will remain on for approximately 5 minutes after the ignition key is removed or turned to the ACC or LOCK position. Howeve ...Other information:
Kia Rio 2017-2020 YB Service Manual: Input Speed Sensor
Specifications Specification Item Specification Type Hall effect sensor Current 22 mA (Max) Output voltage High : 4.8 V - 5.2 V Low : Below 0.8 ...
Kia Rio 2017-2020 YB Service Manual: Room Lamp
Repair procedures Removal • Put on gloves to prevent hand injuries. • When removing with a flat-tip screwdriver or remover, wrap protective t ...