Kia Rio: Automatic Transaxle Control System / Input Speed Sensor
Kia Rio 2017-2020 YB Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Input Speed Sensor
Specifications
Specification |
Item |
Specification |
Type |
Hall effect sensor |
Current |
22 mA (Max) |
Output voltage |
High : 4.8 V - 5.2 V |
Low : Below 0.8 |
Description and operation
Description |
• |
Measures the rate of rotation of the input shaft inside the transaxle and delivers the readings to the TCM. |
• |
The sensor provides critical input data used in feedback control, torque converter clutch control, gear setting control, line pressure control, clutch activation pressure control, and sensor fault analysis.
|
Schematic diagrams
Circuit Diagram |
Repair procedures
Inspection |
1. |
Check the signal waveform of input speed sensor using the KDS/GDS. |
Low speed
High speed
Removal |
1. |
Remove the air cleaner. (Refer to Engine Mechanical System - "Air cleaner") |
2. |
Disconnect the input speed sensor connector (A).
|
3. |
Remove the input speed sensor (A) after loosening the bolt.
|
Installation |
1. |
Install in the reverse order of removal. |
Transaxle Oil Temperature Sensor
Specifications Specification Item Specification Type *NTC thermistor Temp.[(°C)°F] / Resistance (kΩ) ...Output Speed Sensor
Specifications Specification Item Specification Type Hall effect sensor Current 22 mA (Max) ...Other information:
Kia Rio 2017-2020 YB Owners Manual: Smart trunk (for 4 door)
On a vehicle equipped with a smart key, the trunk can be opened with no-touch activation using the Smart Trunk system. How to use the Smart Trunk The trunk can be opened with notouch activation if the conditions below are satisfied: After 15 seconds when all doors are closed and locked T ...
Kia Rio 2017-2020 YB Service Manual: Power Window Switch
Components and components location Components Driver Power Window Switch Connector Pin Information [Front / Rear Driver Safety - Auto Up/Down] [LHD] No. Description No. Description 1 Fr ...