Kia Rio: Lighting System / Room Lamp

Kia Rio 2017-2020 YB Service Manual / Body Electrical System / Lighting System / Room Lamp

Repair procedures

Removal

•	Put on gloves to prevent hand injuries.

•	When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.

1.	Disconnect the negative (-) battery terminal.

2.	Using a screwdriver or remover, separate the room lamp lens (A) from the room lamp.

Remove the room lamp (A) after loosening the screws.

•	When removing the room lamp, be careful of the direction in which the tool is inserted (B).

•	When inserting the tool in the opposite direction, take caution as the room lamp may be damaged.

4.	Remove the room lamp assembly (B) after disconnecting the room lamp connector (A).

Bulb Replacement

1.	Using a screwdriver or remover, separate the room lamp lens (A) from the room lamp.

2.	Disconnect the room lamp bulb (A).

Installation

1.	Connect the room lamp connector.

2.	Install the room lamp.

3.	Install the room lamp lens.

4.	Connect the negative (-) battery terminal.

Turn Signal Lamp

Repair procedures Removal Door Mirror Turn Signal Lamp 1. Disconnect the negative (-) battery terminal. 2. Remove the mirror (A) fro ...

Vanity Lamp

Repair procedures Removal 1. Disconnect the negative (-) battery terminal. 2. Detach the vanity lamp (A) using a flat-tip screwdriver. ...

Other information:

Kia Rio 2017-2020 YB Service Manual: Crankshaft Damper Pulley

Repair procedures Removal and Installation 1. Remove the engine room front under cover and RH side cover. (Refer to Engine and Transaxle Assembly - "Engine Room Under Cover") 2. Remove the drive belt. (Refer to Drive Belt Syste ...

Kia Rio 2017-2020 YB Service Manual: Rear Seat Cushion Cover

Components and components location Component Location 1. Rear seat cushion cover Repair procedures Replacement Put on gloves to protect your hands. ...