Kia Rio: Lighting System / Overhead Console Lamp
Kia Rio 2017-2020 YB Service Manual / Body Electrical System / Lighting System / Overhead Console Lamp
Repair procedures
Inspection |
1. |
Remove the overhead console lamp assembly then check for continuity between terminals. If the continuity is not as specified, replace the map lamp switch.
|
Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the two mounting screws. And then remove the overhead console (A).
|
3. |
Remove the overhead console after disconnecting the connectors (A).
|
Installation |
1. |
Install the overhead console lamp after connecting the connector. |
2. |
Install the lens after tightening 2 screws. |
Vanity Lamp
Repair procedures Removal 1. Disconnect the negative (-) battery terminal. 2. Detach the vanity lamp (A) using a flat-tip screwdriver. ...Hazard Lamp Switch
Repair procedures Inspection 1. Check for continuity between terminals. If the continuity is not as specified, replace the hazard lamp switch. ...Other information:
Kia Rio 2017-2020 YB Owners Manual: Smart trunk (for 4 door)
On a vehicle equipped with a smart key, the trunk can be opened with no-touch activation using the Smart Trunk system. How to use the Smart Trunk The trunk can be opened with notouch activation if the conditions below are satisfied: After 15 seconds when all doors are closed and locked T ...
Kia Rio 2017-2020 YB Owners Manual: Checking the tire inflation pressure
1. After driving approximately 7 ~ 10 km or about 10 min (4 ~ 6 miles), stop at a safe location. 2. Connect the filling hose (3) of the compressor (clip mounted side) directly and then connect the fill ing hose (3) (opposite side) to the tire valve. 3. Connect between compressor and the vehicl ...