Kia Rio: Blower / Power Mosfet (FATC)
Kia Rio 2017-2020 YB Service Manual / Heating,Ventilation, Air Conditioning / Blower / Power Mosfet (FATC)
Repair procedures
| Inspection |
| 1. |
Turn the ignition switch ON. |
| 2. |
Manually operate the control switch and measure the voltage of blower motor. |
| 3. |
Select the control switch to raise voltage until high speed.
Specification
*AUTO COOLING: Auto speed (4.5V~B+) *AUTO HEATING: Auto speed (4.5V~10.5V) |
| 4. |
If the measured voltage is not specification, substitute with a known-good power mosfet and check for proper operation. |
| 5. |
If the problem is corrected, replace the power mosfet. |
| Replacement |
| 1. |
Disconnect the negative (-) battery terminal. |
| 2. |
Disconnect the connector (A) and then remove the power mosfet (B) after loosening the mounting screws.
|
| 3. |
Installation is the reverse order of removal. |
Blower Resistor (MANUAL)
Repair procedures
Inspection
1.
Measure the resistance between the terminals.
2.
The measured resistance is not within specification, the blower ...
Climate Control Air Filtar
Description and operation
Description
The climate control air filter is located in the bower unit. It eliminates foreign
materials and odor. The particle filter performs a role as an ...
Other information:
Kia Rio 2017-2020 YB Owners Manual: Manual Mode
Whether the vehicle is stationary or in motion, Manual Mode is selected by pushing the shift lever from the D (Drive) position into the manual gate. To return to D (Drive) range operation, push the shift lever back into the main gate. Manual Mode manages the driving dynamics by automatically ...
Kia Rio 2017-2020 YB Service Manual: Emergency Signal System
Description and operation Description Introduction of quick brake warning system (ESS) In case of quick brake by driver, the brake lamp or turn signal is blinked to warn against the vehicle at rear. 1. Basic function (Blinking the brake lamp/emergency lamp) ...