Kia Rio: Auto Light Sensor Removal

Auto Light Sensor Inspection

In the state of IGN1 ON, when multi function switch module detects auto light switch on, tail lamp relay output and head lamp low relay output are controlled according to auto light sensor ...

Auto Light Sensor Installation

1. Reconnect the auto light connector. 2. Install the auto light sensor. ...

See also:

Inspection
Clutch Pedal Inspection 1. Measure the clutch pedal height (from the face of the pedal pad to the floorboard) and the clutch pedal clevis pin play (measured at the ...

SS-B Solenoid Valve(ON/OFF) Circuit Diagram
...

Description
The immobilizer system will disable the vehicle unless the proper ignition key is used, in addition to the currently available anti-theft systems such as car alarms, the immobilizer system ai ...