Kia Rio Manuals Rio Car Manuals
Technical Info

Kia Rio: Brake Booster Vacuum Pressure Sensor: Inspection - ISG (Idle Stop & Go) System - Engine Control / Fuel System - Kia Rio UB 2012-2020 Service ManualKia Rio: Brake Booster Vacuum Pressure Sensor: Inspection

1.
Check installation status of BBVPS and Vacuum hose or damage of vacuum hose.
2.
Connect GDS to DLC (Data Link Cable).
3.
Warm up the engine to normal operating temperature.
4.
Monitor "BBVPS" parameter on GDS.



Fig.1) Idle Status
Fig.2) Brake pressure signal

     
With a brake partial vacuum that is too low, the ISG function also starts without activity on the part of the driver.
Insufficient brake partial vacuum can lead to safety risks during braking manoeuvres, when rolling on an incline. To prevent this, the engine is started.
(Refer to “DTC P0557, P0558” in DTC manual)
Brake Booster Vacuum Pressure Sensor: Circuit Diagram
...
AGM Battery: Description
AGM battery is used for especially heavy load on the vehicle network depending on equipment and requirements. AGM stands for Absorbent Glass Material Battery; that is absorbent glass fibre fl ...
See also:

Blower Resistor (MANUAL) Inspection
1. Measure the resistance between the terminals. 2. The measured resistance is not within specification, the blower resistor must be replac ...

Clutch & Brake Components Location
1. Overdrive clutch (OD/C) 2. One way clutch (OWC) 3. Low & Reverse brake (LR/B) 4. Underdrive brake (UD/B) 5. 26 brake(26/B) 6. 35R clutch (35R/C) 7. Damper c ...

Air Outlet and Air Flow
The mode selection switch controls the direction of the air flow through the ventilation System Air Flow Symbol Outlet Description ...

Copyright © www.kiamanual.com 2020-2024 | Privacy Policy | Kia Car Parts