Rio Car Manuals
Technical Info

Kia Rio: Cluster Ionizer (FATC only) Replacement

1.	Disconnect the negative (-) battery terminal.

2.	Remove the glove box. (Refer to BD group - "Crash Pad")

3.	Disconnect the connector (A) and then remove the cluster ionizer (B) after loosening the mounting screws.

4.	Install in the reverse order of removal.

Cluster Ionizer (FATC only) Inspection

1. Press the MODE switch more then 4 times within 2 seconds while pressing the OFF switch. Display Fail description 00 ...

Heater

...

See also:

Removal
• Do not spill brake fluid on the vehicle; it may damage the paint if brake fluid does c ...

Dynamic Damper Installation
1. Apply soap powder on the shaft to prevent being damaged between the shaft spline and the dynamic damper. 2. Install the dynamic damper. ...

Side Airbag (SAB) Module Removal
The side airbag cannot be disassembled from the seat back assembly, so replace the seat back assembly when replacing the ...

Copyright © www.kiamanual.com 2020-2024 | Privacy Policy | Kia Car Parts